Starter Guard's revolutionary, state-of-the-art Micro Technology puts up a 'barrier' between a live battery and a dead battery. The processor inside Starter Guard™ works 24/7 monitoring the voltage in the battery. When it detects that the voltage is becoming too low (lights, radio or other accessory being left on accidentally, etc.), it automatically isolates the battery to prevent further drainage. Consequently, enough charge is always saved to start the motorcycle. To re-engage the electrical system, one just has to push the reset button and start the motorcycle.Starter Guard™ Reserve Power Module offers manual re-connection only and utilizes direct circuit technology. It is intended for motorcycles, personal water craft, and smaller recreational batteries. It can handle up to 1000 amps for 15 consecutive seconds and 80 amps continuously. Voltage cut-off 11.6v.
Starter Guard™ Reserve Power Module eliminates dead batteries by using a patented micro-processor that monitors the motorcycle’s battery power 24/7!
If Starter Guard™ ever detects an excessive drain on the battery that may prevent you from starting your motorcycle, it automatically isolates your battery from the electrical system to prevent further drainage and ensures you will always have enough charge left in your battery to start your motorcycle. When your motorcycle needs to be started, a simple push of the reset button re-engages your battery, power is restored.and away you go!
Starter Guard™ can also help add a layer of protection from unauthorized usage. Simply hold the reset button down for three seconds and Starter Guard™ will engage, isolating the battery. A quick press of the reset and power is restored.
- Starter Guard™ is the only system that prolongs battery life and prevents vehicle theft
- Starter Guard™ offers an unauthorized usage protection system
- Used with any type of battery: Lead acid, gel coat, lithium ions etc
- Used with any type of motorcycle
NOTE: Starter Guard™ is a patented electronic control unit for vehicle batteries that ensures an engine battery always maintains enough power to start and protect the health of the battery as the main energy source for electrical vehicle and the electrical systems in hybrid vehicles.Technical Specifications
- Dimensions: Height: 3/4" Bar to bar: 3" Length: 2 5/8" Weight: 4.2ounces (119.3g)
- Current consumption: Current thru the Starter Guard™ Reserve Power Module for starting engine: 500A pick
- Constant current: 80A
- In disconnected mode: less then 50 Micro A
- Operating Temperature Range: -40°F to -221°F (-40°C- 105°C)
- Starter Guard™ Reserve Power Module is made of non-combustible materials (Nylon composition PA 66)
- Starter Guard™ Reserve Power Module is fully waterproof IP66
- Power reset: By manual push button, to connect press the reset switch, to disconnect (Press and hold for 2.5 consecutive seconds)
- Length of wire: 1 Meter
- Override: No override option built in. To override bridge between the two bars.
BATTERY SAFETY WARNING!
When working with lead acid batteries and accessories, caution must be employed:- Shield eyes. Do not open vent caps or puncture battery casing in any way
- Sulfuric acid can cause blindness and severe burns
- Rinse hands and flush eyes with water immediately
- Avoid sparks, flames and smoking.
